WARRANTY & MAINTENANCE

WARRANTY – Suite 22 Contract merchandise is warranted to be free from defects in material and workmanship for a period of two years from date of delivery. During this warranty period Suite 22 Contract will repair or replace, at its own discretion, merchandise that proves to be defective. This warranty does not apply to damage resulting from an accident, freight, alterations, misuse, tampering, scotch-guarding, negligence or abuse of product. Fabrics and leathers are not warranted against wear or fading. This warranty does not extend to colour, grain, or texture of natural materials such as wood or leather due to natural variations of which Suite 22 has no control. COM/COL materials are in no way warranted. All warranty claims require that the customer return the goods to Suite 22. Prior authorization and written acceptance by Suite 22 Contract must be obtained prior to sending any items back for warranty claims.


WOOD/METAL – To be cleaned only with a lightly dampened cloth and dried immediately after wiping with a soft dry cloth. No chemicals to be used. If necessary, mild soap diluted with water can be used.

FABRIC – We recommend cleaning fabrics regularly to preserve the appearance of textile coatings and prolong their lifespan. As dust and dirt wear fabric out, this should be vacuum cleaned regularly (using a low suction power setting). Stains should be dealt with quickly and liquids absorbed using a white napkin or absorbent cloth. Non-greasy stains can be cleaned by dabbing gently with a damp sponge or with a white lint-free cloth. Wipe in circular motion, moving towards the centre of the stain.

It is advisable to dry with a hair dryer to prevent water spots.

If the fabric used on the order was provided by the client (COM), please connect with the fabric supplier for details.

STEEL, ALUMINIUM AND CAST IRON – Clean with a microfiber cloth soaked with mild soap, degreaser, or alcohol. In the case of painted products, avoid granular detergents and solvents in general. In the case of chrome-plated products, it is possible to use denatured alcohol. For other finishes, use specific detergents for metals. Rinse with water. Always dry after cleaning.

LAMINATE TOPS – Laminate top surfaces should be kept as dry as possible. For daily maintenance, use a microfiber cloth moistened with water to remove dust residues. It is possible to use denatured alcohol and ammonia. In the case of stains, use a non-abrasive melamine sponge with a mild non-abrasive detergent, wipe delicately in circular motion, rinse with lukewarm water and then wipe the surface with a cloth or paper towels.

Avoid using abrasive detergents, abrasive sponges, sandpaper and steel scrubbers.
Avoid highly acidic or alkaline products.
Avoid using sharp, pointed utensils directly on the surface.
Instantly clean off substances such as caramel, tomato juice and bleach.

STEEL TOPS – For daily cleaning, simply wipe with a damp, well wrung out cloth and use a mild detergent on stains. It is possible to use denatured alcohol and ammonia.

Avoid using abrasive detergents, abrasive sponges, sandpaper and steel scrubbers.
Avoid using sharp, pointed utensils directly on the surface.
Avoid highly acidic or alkaline products.


Please note that these suggestions are merely recommendations and do not guarantee the complete removal of stains. Always refer to the technical and maintenance specifications stated on each product datasheet.